Table of Contents
Advertisement
10. Correction functions
Measuring the concentration with a blank value
4
– Press
to call up the concentration measuring
mode.
10.1.1 Activating the blank value measurement
– In the correction funct. menu, call up the blank value
submenu. The following display appears:
The blank value function is active and appears in the
setup menu:
46
The value measured against the prepared blank solu-
tion is displayed.
The blank value meas. function appears:
– Select the on menu item with
1
– Confirm with
.
The stored blank values determined from blank
solutions prepared by the user can be deacti-
vated by switching off the blank value measure-
ment. When doing so, the blank values remain
stored in the memory and can be reactivated
later.
Activating or deactivating the blank value func-
tion applies to all measurements using methods
a blank value was stored for in the memory.
– To measure the blank value, call up the blank value
submenu in the setup menu.
3
28
or
Advertisement
Chapters
Table of Contents
