Figure 4-5, Me-Rtr (Port) Master/Slave Displays - Magnum Energy Sensata MagnaSine Owner's Manual

Parallel Operation
CAUTION: If there is a communication issue, the ME-RTR's top line will show the
inverter's status (e.g., Off, Inverting, Searching) rather than identifying that port's
connected inverter as a master or slave unit. In that case, the router mistakes the unit
as a standalone inverter, will not sync properly, and may result in damage to that unit—
possibly causing damage to the other inverters in the system as well.
I
(M
REMOTE cables
from router to
each inverter's
Remote Port
(blue)
MS4024PAE Master
Inverting
23.4VDC
P1 INV Home
Master Inverter
(stacked)

Figure 4-5, ME-RTR (Port) Master/Slave Displays

Page 44
#2
#1
MS-PAE
MS-PAE
I
NVERTER
NVERTER
(S
)
LAVE
ASTER
MS4024PAE Slave
Inverter Standby
0ADC 23.4VDC
P2
Slave Inverter
#3
MS-PAE
I
NVERTER
1)
(S 2)
LAVE
P1 P2 P3 P4 P5 P6
0ADC
INV Home
(stacked)
© 2017 Sensata Technologies
#4
MS-PAE
I
NVERTER
(S 3)
LAVE
MA
SL1
SL2
SL3
STACK cables
from router to
each inverter's
Stack Port (red)
MS4024PAE Inverter
Searching
29.3VDC 0ADC
P3 INV Home
Standalone Inverter
(not stacked)