Figure 1-2, Electrical Connection Points - Magnum Energy Sensata MagnaSine Owner's Manual

Introduction
DC Equipment Ground Terminal – ties the exposed chassis of the inverter to the DC
7
grounding system. Accepts CU/AL conductors from #14 to #2 AWG (2.1 to 33.6 mm
AC Entry/Exit Connections – two 3/4" knockouts with cable-clamp
8
accommodate and hold the AC input and output
Intake Air Vents – ventilation openings that pull in air to keep the inverter cool for peak
9
performance.
Positive DC Terminal – a 360 degree connection point for the positive (+) cable from
10
the battery bank. Includes a 5/16-18 stainless Kep or Flange nut on a 5/16-18 bolt
(5/8" usable length) that holds the battery cable to the positive DC terminal.
Negative DC Terminal – a 360 degree connection point for the negative (–) cable
11
from the battery bank. Includes a 5/16-18 stainless Kep or Flange nut on a 5/16-18 bolt
(5/8" usable length) that holds the battery cable to the negative DC terminal.
12
Mounting Flange – secures the inverter to a shelf or wall.
8
AC Entry/Exit
Connections
7
DC
Equipment
Ground
Terminal
Page 4
Intake Air Vents
(and on right side)

Figure 1-2, Electrical Connection Points

fi eld wiring.
9
© 2017 Sensata Technologies
).
2
strain reliefs to
10
Positive (+)
DC Terminal
11
Negative (–)
DC Terminal
12
Mounting
Flange