Table of Contents
Advertisement
CARE AND MAINTENANCE
Scooters require a minimal amount of care and maintenance. The following areas require inspection and/or care and maintenance.
TIRE PRESSURE
If equipped with pneumatic tires, always maintain the air pressure in psi rating indicated on each tire. Make sure to maintain the
pressure of the tires between 30-35 psi (2.0 – 2.4 bar).
It is important that the air pressure in psi rating indicated on each tire be maintained in pneumatic tires at all times. Do not overinflate
your tires. Low pressure may result in loss of control, and overinflated tires may burst. Failure to maintain the air pressure in psi rating
indicated on the tires at all times may result in tire and/or wheel failure. Regularly inspect your scooter's tires for signs of wear.
CLEANING AND DISINFECTION
Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your scooter. Avoid using products that may
scratch the surface of your scooter.
If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for use on your product before
application.
Follow all safety instructions for the proper use of the disinfectant and/or cleaning agent before applying it to your product. Failure
to comply may result in skin irritation or premature deterioration of upholstery and/or scooter finishes.
BATTERY TERMINAL CONNECTIONS
Make certain that the terminal connections remain tight and uncorroded.
The batteries must sit flat in the battery wells.
The battery terminals should face towards the inside of the scooter.
Advertisement
Table of Contents
