Heartway Medical Products EV Rider Vita XPress S12E User Manual page 8

Table of Contents

Advertisement

 Weight limitation.
1. Please refer to the specifications table for weight capacity information. Power scooter is rated for a maximum weight capacity.
2. Stay within the specified weight capacity for your scooter. Exceeding the weight capacity voids your warranty.
Heartway will not be held responsible for injuries or property damage resulting from failure to observe weight limitations.
3. Don't carry passengers on scooters.
4. Carrying passengers on scooter may affect the center of gravity, resulting in a tip or a fall.
 Tire inflation
1.
If your scooter is equipped with pneumatic tires, it is necessary to check the air pressure at least one time a week.
2.
Proper inflation pressures will prolong the life your tires and ensure the smooth operation while riding.
3.
Do not under‐inflate or over‐inflate your tires. It is critically important that 30‐35 psi (2-2.4 bar) tire pressure be maintained in pneumatic tires at all times.
4. Inflating your tires from an unregulated air source could over‐inflate them, resulting in a burs tire.
 Temperature
1. Some of the parts of the power scooter are susceptible to change in temperature. The controller can only operate in temperature that ranges between -4 ° F ~ 113 ° F.
2. At extreme low temperatures, the batteries may freeze, and your power scooter may not be able to operate. In extreme high temperatures, it may operate at slower
speeds due to a safety feature of the controller that prevents damage to the motors and other electrical components.
3. The scooter can generally be operated at outside
4. Some parts of the scooter tend to be temperature dependent. The controller works best at temperatures between
5. Below -5 ° F the batteries can freeze and the scooter may not work.
6. At extremely high temperatures
slower maximum speeds.
temperatures from -4 ° F to 113 ° F.
> 113 °
C, the safety function of the control, which prevents damage to the motors and other electrical components, can lead to
77 ° F and 122 °
F.

Advertisement

Table of Contents
loading

Table of Contents