Table of Contents
Advertisement
19.
Operating in rain, snow, salt, mist conditions and on icy or slippery surfaces may have an adverse affect on the electrical system.
20.
Never sit on your scooter when it is being used in connection with any type of lift or elevation product. Your scooter is not designed with such
use in mind and any damage or injury incurred from such use is not the responsibility of Heartway.
21.
Don't touch the motor after driving. It is hot.
22.
Drive-wheel needs to be switched to engaged-mode while transporting the power scooter with a car or airplane.
23.
Drive-wheel needs to be switched to engaged-mode while transporting the power scooter with a car or airplane.
24.
Surface temperatures can increase when exposed to external sources of heat.
Surfaces of the power scooter that can come into direct contact with the occupant's skin and during normal use and that are within occupant
25.
reach shall not exceed 105 °F. The motor surface can reach temperatures greater than 105°F after driving. Do not touch these parts when
disassembling the scooter or wait until the motor is cooled down.
26.
Please always turn off the power prior to entering or existing this scooter.
27.
Do not operate this scoter if it is behaving abnormally or erratically.
MODIFICATIONS
Heartway Medical Product has designed and engineered power scooter to provide maximum utility. However, under no circumstances should you
modify, add, remove, or disable any part or function of your power scooter. Personal injury and damage to the power scooter may result.
1. Do not modify your power scooter in any way not authorized by Heartway. Do not use accessories if they have not been tested or approved for
Heartway products. Changing of controller parameter shall be only performed by authorized technicians due to the safety concern.
2. Get to know the feel of your power scooter and its capabilities. Heartway recommends that you perform a safety check before each use to
make sure your power scooter operates safely.
Inspections prior to using your power scooter:
1. If equipped with pneumatic tires, please check for proper tire inflations.
2. Please check all electrical connections and make sure they are tight and not corroded.
3. Please check all harness connections and make sure they are secured properly.
4. Please check the brakes.
Advertisement
Table of Contents
