Care And Maintenance - Heartway Medical Products S11 Zen User Manual

CARE AND MAINTENANCE

Scooters require a minimal amount of care and maintenance. The following areas require inspection
and/or care and maintenance.
CLEANING AND DISINFECTION
 Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your
scooter. Avoid using products that may scratch the surface of your scooter.
 If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe
for use on your product before application.
 Follow all safety instructions for the proper use of the disinfectant and/or cleaning agent before
applying it to your product. Failure to comply may result in skin irritation or premature
deterioration of upholstery and/or scooter finishes.
BATTERY TERMINAL CONNECTIONS
 Make certain that the terminal connections remain tight and uncorroded.
 The batteries must sit flat in the battery wells.
 The battery terminals should face towards the inside of the scooter.
WIRING HARNESSES
 Regularly check all wiring connections.
 Regularly check all wiring insulation, including the charger power cord, for wear or damage.
 Have your authorized dealer repair or replace any damaged connector, connection, or insula-
tion that you find before using your scooter again.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and you have a flat tire, you can have the
tube replaced. If your scooter is equipped with a solid tire insert either the solid insert or the
entire wheel must be replaced depending on the model. Contact your authorized dealer
regarding replacement wheels for your scooters.
www.heartway.com.tw
32