Table of Contents
Advertisement
4 Operations
4.1 Power up the Server
Insert the power cord plug, then press the Power Button.
4.2 Power down the Server
WARNING:
To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power Button
does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
IMPORTANT:
1.
Back up the server data.
2.
Shut down the operating system.
3.
Disconnect the power cords.
The system is now without power.
4.3 Extend the Server from the Rack
1.
Power off the server, and open the node handle.
2.
Extend the server from the rack.
WARNING:
To reduce the risk of personal injury or equipment damage, be sure that the rack
is adequately stabilized before extending a component from the rack.
3.
After performing the installation or maintenance procedure, slide the server back into the
rack.
WARNING:
To reduce the risk of personal injury, be careful when sliding the server into the
rack. The sliding rails could pinch your fingers.
If installing a hot-plug device, it is not necessary to power down the server.
Operations
9
Advertisement
Table of Contents
