Table of Contents
Advertisement
To Cancel the Self-cleaning Cycle
To cancel the self-clean function, turn the Timer knob to the
[
] button and then rotate the adjusting knob counter-
clockwise to set the timer back to ( 0.00 ). The heating part
of the cycle will end and the cooling part of the cycle will
start. When the oven temperature has fallen sufficiently the
interlock neon will go out and the door will unlock.
When the door has unlocked turn the oven function control
back to OFF.
WARNING!
n
n
DO NOT attempt to stop the self-clean cycle by
turning the oven function control to OFF. While this
will stop the heating part of the cleaning cycle it
will also stop the ventilation fans from running and
cause the oven thermal cut-out to trip.
To Start the Self-cleaning Cycle Automatically
By using the timer, the self-clean cycle can be programmed to
turn on and off automatically.
Note: You cannot set the start time directly – this is set
automatically by setting the 'Cleaning period' and the 'Stop
time' .
Set the oven function control to self-clean (Fig. 7.7). Turn the
Timer knob to the [
] position to set the default cleaning
time (Fig. 7.10). To adjust the cleaning cycle duration, rotate
the Adjustment knob and set the time as required.
Now turn the Timer knob to the [
the minimum 'Stop time' (Fig. 7.12) on the display. Rotate
the Adjustment knob clockwise until the required 'Stop time'
shows (Fig. 7.13).
The self-clean cycle will now start automatically.
To Cancel the Automatic Self-cleaning Cycle
To return to manual operation the 'Cleaning period' must
be cancelled. Turn the Timer knob to the [
rotate the Adjustment knob counter-clockwise until the timer
display reads ( 0.00 ).
Cleaning Table
Cleaners listed are available from supermarkets or electrical
retailers as stated. For enamelled surfaces use a cleaner that is
approved for use on vitreous enamel.
Regular cleaning is recommended. For easier cleaning, wipe
up any spillages immediately.
] position to bring up
E
] position and
E
(Table 7.2)
Part
Finish
Burner grates &
top of burner
Porcelain enamel
heads
Burner base
Aluminum
Maintop top
Stainless steel
Griddle
(Optional
Non-stick surface
Extra)
Sides, toe-kick
Painted enamel
Painted enamel
Control panel
or stainless steel
Oven interior
Porcelain enamel
Chrome plated
Door handles
aluminum
Oven racks &
Chrome
supports
ArtNo.050-0070 - Cleaning table AGA Professional
Door inner
Glass
Outer door
Painted enamel
and drawer
or stainless steel
23
ArtNo.301-0008 2BC
Stopping the oven 2
Recommended
Cleaning Method
Mildly abrasive cleaner such as
Bon Ami ® or Soft Scrub®.
Dishwasher.
As above.
Hot soapy water, non-abrasive
cleaner, soft cloth.
Allow to cool. Wash in hot soapy
water. Do not use abrasive
cleaners/scourers. Dishwasher.
Hot soapy water and soft cloth.
Non-abrasive cleaner, soft cloth.
Branded oven cleaner suitable for
enamel surfaces. Take care not to
damage the oven door seals.
Non-abrasive cleaner, hot soapy
water, soft cloth.
Dishwasher. Hot soapy water and
scouring pad.
Hot soapy water and soft cloth.
Mildly abrasive cleaner with a soft
cloth.
Multi-surface cleaner, soft cloth.
Table 7.2
Fig. 7.12
Fig. 7.13
Advertisement
Table of Contents
