Chassis Cleaning - Terex PT60CE Operation And Maintenance Manual

Coolant and machine components can be HOT! Allow the machine to
cool thoroughly prior to performing maintenance or service to avoid the
possibility of burns.

7.20 Chassis Cleaning

Periodic cleaning of the chassis area
beneath the cab and engine
compartment is also necessary to
maintain safe operation. Clean as
necessary. (fig. 7.20-1)
To clean the chassis/engine:
1. Shut the machine down according to the procedure in section 5.13, remove
the belly pans on the underside of the machine.
2. Raise the hood at the rear of the machine.
3. Pressure wash any debris from the engine compartment and chassis area
out through the lower opening.
4. Re-install the belly pans and close the hood to complete the cleaning
procedure.
If any safety signs are found to be damaged or missing after cleaning,
contact your dealer for a replacement immediately. They can be reap-
plied according to the location illustration in section 2.3 of this manual.
7 MAINTENANCE
7.20-1
79