Ricoh FAX2500L Operator's Manual page 129

SECTION 7. SOLVING PROBLEMS
The telephone keeps ringing and no fax is
printed.
No printout; the Add Paper indicator is lit.
No printout; the Clear Copy indicator
blinks.
Stripes on copies.
You can't receive phone calls; the unit
only rings once then goes into receive
mode.
You can't receive phone calls; the unit
does not ring.
Dialling took place, but polling could not.
120
SYMPTOM REQUIRED ACTION
You are in Manual Receive mode.
Change to Auto Receive mode (see
page 27).
Power is switched off.
The cassettes are empty.
Add paper (see page 96).
The printer has jammed. Clear the jam
(see page 115).
Do user maintenance, especially
rollers [N], [L], and [U] (if the lower
cassette is installed). See page 103.
Clean the exposure glass (see page
103).
Do user maintenance, especially glass
[I] and wire [T] (see page 103).
You are in Auto Receive mode. Change to
Manual Receive mode (see page 27).
The telephone line is not connected.
ID Codes do not match.
Contact the person at the other end.