Table of Contents
Advertisement
2.
Display
Function Key
Yes/No Keys
Scroll Key
3.
G4/G3 Selector
Key
Halftone Key
Contrast
Selector Key
Resolution
Selector Key
Memory Key
Copy Key
4.
Quick Dial Keys
5.
User Function
Keys
6.
Speed Dial/Tel
Directory Key
AI Redial Key
On Hook Dial
Key
Pause Key
Clear Key
7.
Ten Key Pad
Stop Key
Start Key
Displays prompts, warnings, and selected modes.
Press to use one of the numbered functions.
Use to answer questions on the display
When an arrow is shown on the display, use this key to access
the options, items, or functions indicated by the arrow. Also use it
to shift the cursor when programming or editing an item on the
display.
When dialling, press this key to light the indicator that
corresponds with the type of network that you wish to
communicate on. The G4 setting is only available if you have
installed the optional Group 4 Interface Kit.
Press this to use halftone mode.
Press this to select either Darken, Normal, or Lighten.
Press this to select either Standard, Detail, or Fine.
If the indicator is lit, your document will be stored before
transmission. If it is not lit, your document will be sent
immediately without being stored. Press the key to change the
mode.
Press this to copy the document now in the feeder.
Each of these can be programmed with a telephone number, a
group, or a keystroke program. You can also use these keys to
type names and labels such as the RTI and TTI.
Each of these can be programmed for rapid access to frequently
used features. In particular, if you wish to use Group Dial, or
Tonal Signal Transmission, you have to program User Function
Keys in advance before you can use these features.
Press this to dial using Speed Dial or the Telephone Directory
Feature.
Press this to redial one of the last ten numbers that was dialled.
Press this dial without picking up the handset.
Press this if you need to insert a pause when dialling.
Use this as a backspace key during programming.
Use this as a telephone keypad, or to enter Speed Dial codes.
Press this to stop the machine and return it to standby mode.
Press this to start fax communication.
SECTION 1. COMPONENT GUIDE
17
Advertisement
Table of Contents
