Detected Device - ZyXEL Communications NWA50AX User Manual

Table 22 Monitor > Wireless > WDS Link Info (continued)
L ABEL
MAC Address
Radio
SSID Name
Security Mode
Signal Strength
Tx Rate
Rx Rate
Association Time
Refresh
8.7 De te c te d De vic e
Use this screen to view information about surrounding APs which you could mark as Rogue or Friendly.
Click
Mo nito r > Wire le ss > De te c te d De vic e
mode (see Section 1.4 on page
79.
Note: If the Zyxel Device supports monitor mode, the radio or at least one of the Zyxel
Device's radio must be set to monitor mode (in the
in order to detect other wireless devices in its vicinity.
If the Zyxel Device does not support monitor mode, turn on rogue AP detection in the
C o nfig ura tio n > Wire le ss > Ro g ue AP
Chapter 8 Monitor
DESC RIPT IO N
This is the MAC address of the root AP or repeater to which the Zyxel Device is connected using
WDS.
This is the radio number on the root AP or repeater to which the Zyxel Device is connected
using WDS.
This indicates the name of the wireless network to which the Zyxel Device is connected using
WDS.
This indicates which secure encryption methods is being used by the Zyxel Device to connect
to the root AP or repeater using WDS.
This is the RSSI (Received Signal Strength Indicator) of the wireless connection in WDS.
This is the maximum transmission rate of the root AP or repeater to which the Zyxel Device is
connected using WDS.
This is the maximum reception rate of the root AP or repeater to which the Zyxel Device is
connected using WDS.
This displays the time the Zyxel Device first associated with the wireless network using WDS.
Click this to refresh the items displayed on this page.
18). For more information about Rogue APs, see
NWA50AX User's Guide
to access this screen. Not all Zyxel Devices support monitor
Wire le ss > AP Ma na g e m e nt
screen to detect other APs.
63
Section 10.3 on page
screen)