Wimax Modem Access And Login - ZyXEL Communications MAX-207HW2 User Manual

Chapter 17 Troubleshooting
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Disconnect and re-connect the power adapter to the WiMAX Modem.
4
If the problem continues, contact the vendor.
5

17.2 WiMAX Modem Access and Login

I forgot the IP address for the WiMAX Modem.
The default IP address is http://192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address
2
of the WiMAX Modem by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the WiMAX Modem (it depends on the network), so enter this IP
address in your Internet browser.
If this does not work, you have to reset the WiMAX Modem to its factory defaults.
3
See Section 17.1 on page
I forgot the password.
The default password is 284wj/6.
1
If this does not work, you have to reset the WiMAX Modem to its factory defaults.
2
See Section 9.4 on page
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is http://192.168.1.1.
170
169.
104.
User's Guide