Bit Stream Setting - ESP REKIPC36FDW Manual

User Manual

6.2 Bit stream setting

Click on Bit Stream Setting in Network Parameter Menu to open the following page:
By default the available bit streams are: main bit stream, sub-bit stream and cell phone bit steam.
You can set resolution, frame rate, video encoding, encoding level, audio, I frame interval, variable frame
rate and bit stream size respectively for main bit stream, sub-bit stream and cell phone bit steam.
Resolution: Set resolutions respectively for bit streams: The highest resolution for main bit stream is
2048×1536. The higher resolution for sub-bit stream is 704×480. The only resolution available for cell
phone bit steam is 320×480.
Note: The higher resolution for main bit stream of 3MP Series is 2048*1536 (frame rate of 30 fps). The
higher resolution for main bit stream of 4MP Series is 2592*1520 (frame rate of 20 fps). The higher
resolution for main bit stream of 5MP Series is 2592*1944 (frame rate of 15 fps).The higher resolution for
main bit stream of 8MP Series is 3840x2160 (frame rate of 30 fps). The higher resolution for main bit
stream of 2MP Series is 1920*1080 (frame rate of 30 fps).
Frame rate: When refresh rate is 50Hz, the maximum available frame rate is 25 fps. When refresh rate
is 60Hz, the maximum available frame rate is 30 fps.
Video encoding: Set video encoding (H265/H264) for each bit stream.
Audio: Enable audio for each bit stream.
I frame interval: Set I frame interval.
Bitrate control: Set constant or variable bitrate for bit stream.
Bit stream: Set bit stream value by choosing fixed value or customizing it.
Note: Range of main bit stream is 256-8192.
Range of sub-bit stream is 128-4096.
Range of cell phone bit steam is 8-1536.
Video encoding and encoding level are unavailable in setting page of IP camera of 2MP Series.
20