I/O Alarm (If Applicable); Lens Blocking - ESP REKIPC36FDW Manual

7.2 I/O Alarm (if applicable)

Click on I/O Alarm in Alarm Parameter menu to open the following page:
I/O Alarm Input: Enable or disable I/O alarm.
I/O Alarm Output Time: Set I/O alarm output time (10s, 20s, 40s, 60s)
Recording Delay Time: After checking Enable Triggered Recording, you can set recording delay time
(5S/10S/20S/30S)

7.3 Lens Blocking

Click on Lens Blocking in Alarm Parameter menu to open the following page:
Check Lens Blocking option (checked by default) to activate Security Level and Mail Linkage options.
Security Level: Set security level for lens blocking (Level 1~8; larger value indicates higher security
level)
Mail Linkage: It is disabled by default. After enabled, it may be used with SMTP to enable mail delivery.
26
User Manual