Table of Contents
Advertisement
3. Device Operation Instructions
3.1 Check Connection
1.
The default factory IP address for IP camera is 192.168.1.168 and the subnet mask is
255.255.255.0. Allocate to your computer an IP address in the same network segment as the IP
camera, for example, 192.168.1.69, and a same subnet mask as that of the IP camera.
2.
Test whether the IP camera is connected properly and started normally by clicking on Start >
Run and entering "cmd" and pressing ENTER, and entering "ping 192.168.1.168" in the
command line window to
Check whether the IP camera is accessible. If the PING command is executed successfully, it
indicates that the IP camera operates normally and the network is connected properly. If the PING
command fails, check IP address and gateway setting of the PC and connectivity of the network.
7
User Manual
Advertisement
Table of Contents
