Line Crossing Detection（Lcd - ESP REKIPC36FDW Manual

User Manual
Sensitive：Sensitive level, range is 1-4, default to 2. If the detected object sensitivity is more high, the
moving
Object can be detected easily. Meanwhile, the false detection rate is higher. Suggest to use default level。
Scene：Scene setup, user can choose Indoor or outoddor according to real situationEnable I/O Out：
Trigger alarm then if will be I/O output
Send Email ：If trigger alarm, send the Email to notify, the Email setup need to set in Remote Setting
–Network-Email
Record：if to do record
Rule Number：Max set 4 rule numberule Switch：The switch to every rule
Rule Type：Setup to each rule, A->B means can detect A to B direction moving, B->A means can detect
B to A direction moving, A ←→B means can detect two directions moving.
11.4 Line Crossing Detection（LCD）
Click Line Crossing under the menu Intelligent to go to below page
Function description: in the preview page, detect and followup the moving object to pass through the
guard line
Switch：LCD master switch
Latch Time：when trigger alarm, the external alarm device ouput alarm time, can selected time period is
5S,10S, 20S, 30S.
Post Recording：
after triggered alarm, the post record time, selected time period is 5S, 10S, 20S, 30S
Sensitive：
Sensitive level, range is 1-4, default to 2. If the detected object sensitivity is more high, the moving
Object can be detected easily. Meanwhile, the false detection rate is higher. Suggest to use default level
Scene：Scene setup, user can choose Indoor or outoddor according to real situationEnable I/O Out：
Trigger alarm then if will be I/O output
Send Email：
35