Pedestrian Detection(Pd) - ESP REKIPC36FDW Manual

User Manual
Rule Type：
Setup to each rule, A->B means can detect A to B direction moving, B->A means can detect B to A
direction moving, A ←→B means can detect two directions moving.

11.6 Pedestrian Detection(PD)

Function description: in the preview page, detect the moving pedestrian.
【Switch】 ： Enable/ Disable
【 Latch Time 】 ： when trigger alarm, the external alarm device output alarm time, can selected time
period is 5S,10S, 20S, 30S.
【Post Recording】 ： after triggered alarm, the post record time, selected time period is 5S, 10S, 20S, 30S
【Level】 ：detecting range is Small, Middle, Big, default to Middle. The detected target is far away , the
range can be small, meanwhile the detected target is nearby , the range should be Big. Different detect
ranges can display as one big and one small red rectangular box on the screen.( red rectangular box
indicates the maximum and minimum range of the detected target at the current detecting, the detect
range can be setup according to monitoring target.)
【Scene】 ：Scene setup, only support indoor.
Enable I/O Out：Trigger alarm then if will be I/O output
Send Email：
If trigger alarm, send the Email to notify, the Email setup need to set in Remote Setting –Network-Email
Record：if to do record.
Rule Number：Max set 1 rule number.
Rule Switch：The switch to every rule, Eanble/disable.
Rule Type：Setup to each rule, default to Normal.
37