Cross Counting(Fd) - ESP REKIPC36FDW Manual

User Manual

11.8 Cross Counting(FD)

Function description: in the preview page, detect and line crossing count the moving object and
pedestrian.
【Switch】 ：Enable/ Disable
【 Latch Time 】 ： when trigger alarm, the external alarm device output alarm time, can selected time
period is 5S,10S, 20S, 30S.
【Post Recording】 ： after triggered alarm, the post record time, selected time period is 5S, 10S, 20S, 30S
【Level】 ：range is 1-4, default to 2. If the detected object sensitivity is more high, the moving
Object can be detected easily. Meanwhile, the false detection rate is higher. Suggest to use default level.
【Scene】 ：Scene setup, only support indoor.
Enable I/O Out：Trigger alarm then if will be I/O output
Send Email ：If trigger alarm, send the Email to notify, the Email setup need to set in Remote Setting
–Network-Email
Record：if to do record.
Rule Number：Max set 1 rule number.
Rule Switch：The switch to every rule, Eanble/disable.
Rule Type： Setup to each rule, Object-line crossing count of the object. Pedestrain- line crossing count of
the pedestrain.
Tips：
1）IA function enable, need 30S-1 mins to initializate, during this period, function don't work
2）When enable PID, LCD and SOD function at same time, the setup is follow up the the last one scene
3) the Intelligent alarm of FD,PD and CC are exclusive with the PID,LCD,SOD, cannot be used at the
same time.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
39