Roi (If Applicable) - ESP REKIPC36FDW Manual

4.4 ROI (if applicable)

Click on ROI in Display Configuration to open the following page:
Procedure of setting ROI:
1. Choose an area of application
2. Press down and hold the left mouse button and drag out a ROI area (only one ROI can be set for
each area)
3. Click on Save to apply the ROI area.
Bit stream type: Choose bit stream effective for ROI among Main Bit Stream, Sub-Bit Stream and Cell
Phone Stream.
Area Numbering: Up to 8 ROI areas can be set in one bit stream.
Enable ROI area: Enable or disable ROI area
Area image quality: Set quality of the image in the area (relative quality, absolute quality)
ROI level: Set ROI level in one bit stream; larger value indicates higher-quality image in ROI area (1~6
Levels)
Non-ROI frame rate: Set frame rate out of RIO area; smaller value indicates higher-quality image in ROI
area. Range of frame rate is in relation to video standard and resolution. (Note: Different non-ROI frame
rates may be allocated to different ROI areas, but the minimum value among them is used as the frame
rate to be applied for the non-ROI area on the preview frame. ）
17
User Manual