Step 4 Click the Export button to start exporting.
Step 5 After the exporting is complete, click OK to finish the packet export.
Up to 1M data can be exported each time.
12.4.3 Checking Network Status
Purpose
You can also check the network status and quick set the network parameters in this interface.
Step 1 Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
Step 2 Click the Network Detection tab to enter the Network Detection interface.
Step 3 Click Status on the right bottom of the interface.
If the network is normal the following message box pops out.
Digital Video Recorder User Manual
Figure 12-27 Export Network Packet
Figure 12-28 Packet Export Attention
Figure 12-29 Checking Network Status
198