Checking Network Status - HIKVISION HWD Series User Manual

Digital Video Recorder User Manual
By connecting the DVR to network, the captured network data packet can be exported to USB-flash
disk, SATA and other local backup devices.
Step 1 Go to Menu > Maintenance > Net Detect > Network Detection.
Step 2 Select the backup device from the drop-down list of Device Name.
Click the Refresh button if the connected local backup device cannot be displayed. When it fails to
detect the backup device, please check whether it is compatible with the DVR. You can format the
backup device if the format is incorrect.
Figure 11-24 Export Network Packet
Step 3 Click the Export button to start exporting.
Step 4 After the exporting is complete, click OK to finish the packet export.
Figure 11-25 Packet Export Attention
Up to 1M data can be exported each time.

11.3.3 Checking Network Status

Purpose
You can also check the network status and quick set the network parameters in this interface.
Step 1 Go to Menu > Maintenance > Net Detect > Network Detection.
Step 2 Click Status on the right bottom of the interface.
165