Table of Contents
Advertisement
For the DS-9000HUHI-F16/N series DVR, you can enable or disable the analog channels, check the
analog channel status and realize quick live view.
Step 1 Enter the Analog Camera interface.
Menu > Camera > Analog
Step 2 You can view the status of the analog channel under the Status column. Enabled means the
analog channel is enabled. Disabled means it is disabled.
Step 3 Click
after the enabled analog channel under the Live View column to realize live view
of the selected channel.
Step 4 Check the checkbox(es) to enable the analog channel(s) or uncheck the checkbox(es) to
disable the channel(s).
Step 5 Click Apply to save the settings. Then the Attention box pops up as below.
Digital Video Recorder User Manual
Figure 2-33 Configure Analog Camera Status
Figure 2-34 Live View
68
Advertisement
Table of Contents
