Enable Raid - HIKVISION DS-7208HUHI-K1S User Manual

13.1.1 Enable RAID

Purpose
Perform the following steps to enable the RAID function, or the disk array cannot be
created.
 OPTION 1:
Enable the RAID function in the Wizard when the device startup, please refer to step
7 of Chapter 2.3.2.
 OPTION 2:
Enable the RAID function in the HDD Management Interface.
Step 1 Enter the Disk Mode configuration interface.
Menu > HDD > Advanced
Step 2 Check the checkbox of Enable RAID.
Step 3 Click the Apply button to save the settings.
Step 4 Reboot the device to take RAID into effect.
Digital Video Recorder User Manual
Figure 13-1 RAID Working Flow
Figure 13-2 Enable RAID Interface
202