Table of Contents
Advertisement
You can copy the same settings to the cameras with the same signal, e.g., the channel No. 1-3
connect to the TVI cameras, and the channel No.4 connects to an analog camera, and then the
settings of channel No. 1 can be only copied to channel 2 and 3.
Step 7 Set encoding parameters for sub-stream.
1) Select the Sub-Stream tab.
2) Select a camera in the camera dropdown list.
3) Configure the parameters.
4) Click Apply to save the settings.
5) (Optional) If the parameters can also be used to other cameras, click Copy to copy the
settings to other channels.
For DS-7200/7300/7600/8100/9000HUHI-F/N series, when 3 MP signal input is connected,
the resolution of sub-stream does not support QVGA/QCIF. It will adjust to CIF
automatically in this condition.
For DS-7200/7300/7600/8100/9000HUHI-F/N series, when 3 MP signal input is connected,
the frame rate of sub-stream cannot exceed 15 fps.
Step 8 Set parameters for capture.
1) Select the Capture tab.
Digital Video Recorder User Manual
Figure 5-5 Copy Camera Settings
Figure 5-6 Sub-Stream Encoding
96
Advertisement
Table of Contents
