Exporting Network Packet; Checking The Network Status - HIKVISION ERT-F204 Series User Manual

ERT-F2xxx DVR User Manual

Exporting Network Packet

Purpose:
By connecting the DVR to a network, the captured network data packet can be exported to a USB flash disk,
SATA, DVD-R/W, or other local backup device.
Go to Menu > Maintenance > Net Detect.
Click the Network Detection tab to enter the Network Detection interface.
Select the backup device from the Device Name drop-down list, as shown in Figure 9-22.
Click Refresh if the connected local backup device cannot be displayed. If the backup device cannot
be detected, check whether it is compatible with the DVR. Format the backup device if the format is
incorrect.
Click Export to start exporting.
After exporting is complete, click OK to finish the packet export, as shown in Figure 9-23.
Up to 1 MB of data can be exported each time.

Checking the Network Status

Purpose:
You can check the network status and quick set the network parameters in this interface.
Click Status on the lower-right corner of the page.
UM ERT-F2xxx 030118NA
Export Network Packet
Packet Export Attention
111