Table of Contents
Advertisement
Step 9 In the pop-up Attention box, click the Yes button to finish the settings.
14.3.2 Setting HDD Property
Purpose
The HDD property can be set to redundancy, read-only or read/write (R/W). Before
setting the HDD property, please set the storage mode to Group (refer to step1-4 of
Chapter 14.3.1 Setting HDD Groups).
A HDD can be set to read-only to prevent important recorded files from being
overwritten when the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto
the redundancy HDD and the R/W HDD simultaneously so as to ensure high security
and reliability of video data.
Step 1 Enter the HDD Information interface.
Menu > HDD > General
Step 2 Select HDD from the list and click the
interface, as shown in Figure 14-15.
Step 3 Set the HDD property to R/W, Read-only or Redundancy.
Step 4 Click the OK button to save the settings and exit the interface.
Step 5 In the HDD Information menu, the HDD property will be displayed in the list.
Digital Video Recorder User Manual
Figure 14-14 Confirm HDD Group Settings
Figure 14-15 Set HDD Property
215
icon to enter the Local HDD Settings
Advertisement
Table of Contents
