HIKVISION DS-7208HUHI-K1S User Manual page 243

Password: Set the password for the user account.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong
password of your own choosing (Using a minimum of 8 characters, including at least
three of the following categories: upper case letters, lower case letters, numbers,
and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
Level: Set the user level to Operator or Guest. Different user levels have
different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in
Remote Configuration and all operating permission in Camera Configuration
by default.
•
Guest: The Guest user has no permission of Two-way Audio in Remote
Configuration and only has the local/remote playback in the Camera
Configuration by default.
User's MAC Address: The MAC address of the remote PC which logs onto the
DVR. If it is configured and enabled, it only allows the remote user with this MAC
address to access the DVR.
Step 4 Click the OK button to save the settings and go back to the User Management
interface. The added new user will be displayed on the list, as shown in Figure
17-10.
Figure 17-10 Added User Listed in User Management Interface
Step 5 You can assign permissions for the added user.
1) Select the user from the list and then click
Settings interface, as shown in Figure 17-11.
Digital Video Recorder User Manual
242
to enter the Permission