Table of Contents
Advertisement
Step 2 Click OK to save the password and activate the device.
For the old version device, if you update it to the new version, the following dialog box will pop up
once the device starts up. You can click YES and follow the wizard to set a strong password.
2.3 Basic Configuration in Startup Wizard
2.3.1 Configuring the Signal Input Channel
Purpose
For some series, after the startup and login, the device system enters the Wizard for configuring
the signal input.
You can also click Menu > Camera > Signal Input Status to configure the signal input.
Step 1 Check the checkbox to select different signal input types: TVI/CVBS, AHD, and IP (For -E and
DS-9000HUHI-F16/N series DVR, there is no signal input configuration interface.).
Step 2 Click Apply to save the settings.
Digital Video Recorder User Manual
Figure 2-4 Warning
50
Advertisement
Table of Contents
