HIKVISION DS-7208HUHI-K1S User Manual page 11

 Management and maintenance of backup devices.
Alarm and Exception
 Configurable arming time of alarm input/output;
 Alarm for video loss, motion detection, video tampering, abnormal signal, video
input/recording resolution mismatch, illegal login, network disconnected, IP confliction,
record/capture exception, HDD error, and HDD full, etc.;
 Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending
email and alarm output;
 VCA detection alarm is supported;
DS-7100 does not support VCA alarm.
 Support POS triggered alarm;
 Support coaxial alarm;
 Automatic restore when system is abnormal.
Other Local Functions
 Manual and automatic video quality diagnostics;
 Operable by mouse and remote control;
 Three-level user management; admin user can create many operating account and define
their operating permission, which includes the permission to access any channel;
 Completeness of operation, alarm, exceptions and log writing and searching;
 Manually triggering and clearing alarms;
 Importing and exporting of configuration file of devices;
 Getting cameras type information automatically.
Network Functions
 2 self-adaptive 10M/100M/1000M network interfaces for DS-8100HQHI-F/N and
DS-7300/8100/9000HUHI-F/N series. For DS-8100HQHI-F/N series, three working modes are
configurable: multi-address, load balance, network fault tolerance. For
DS-7300/8100/9000HUHI-F/N series, only multi-address and network fault tolerance are
configurable. 1 self-adaptive 10M/100M/1000M network interface or 1 self-adaptive
10M/100Mbps network interface provided for other models;
 IPv6 is supported;
 TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™ and HTTPS
are supported;
Digital Video Recorder User Manual
10