Table of Contents
Advertisement
Pre-play and post-play can be configured.
You can click
for the description of buttons on the toolbar.
6.1.5 Playing Back by Smart Search
Purpose
The smart playback function provides an easy way to get through the less effective information.
When you select the smart playback mode, the system will analyze the video containing the
motion or VCA information, mark it with green color and play it in the normal speed while the
video without motion will be played in the 16-time speed. The smart playback rules and areas are
configurable.
Before you start
To get the smart search result, the corresponding event type must be enabled and configured on
the IP camera. Here we take the intrusion detection as an example.
Step 1 Log in the IP camera by the web browser, and enable the intrusion detection by checking the
checkbox of it. You may enter the motion detection configuration interface by
Configuration > Advanced Configuration > Events > Intrusion Detection.
Step 2 Configure the required parameters of intrusion detection, including area, arming schedule
and linkage methods. Refer to the user manual of smart IP camera for detailed instructions.
Steps
Step 1 Enter the Playback interface.
Menu>Playback
Step 2 Select the Smart in the drop-down list on the top-left side.
Step 3 Select a camera in the camera list.
Digital Video Recorder User Manual
or
button to select the previous or next tag. Please refer to Table 6.1
Figure 6-13 Setting Intrusion Detection on IP Camera
124
Advertisement
Table of Contents
