Configuring 1080P Lite - HIKVISION DS-7208HUHI-K1S User Manual

Step 3 Set the HDD to Read-only.
Step 4 Click OK to save settings and back to the upper level menu.
 You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change
the property to R/W.
 If there is only one HDD and is set to Read-only, the DVR cannot record any files. Only live
view mode is available.
 If you set the HDD to Read-only when the DVR is saving files in it, then the file will be saved
in next R/W HDD. If there is only one HDD, the recording will be stopped.

5.11 Configuring 1080P Lite

Purpose
When the 1080P Lite Mode is enabled, the encoding resolution at 1080P Lite (real-time) is
supported. If not, up to 1080P (non-real-time) is supported.
This section is appplicable to DS-7100/7200/7300/8100HQHI-F/N series DVR only.
Task1: Enabling the 1080P Lite Mode
Step 1 Enter the Record menu
Menu > Record
Step 2 Click Advanced to enter the advanced interface.
Digital Video Recorder User Manual
Figure 5-34 HDD General- Editing
114