Fluorescence Attachment Assembly Diagram - Accu-Scope EXC-500 Manual

FLUORESCENCE ATTACHMENT ASSEMBLY
The diagram below shows how to assemble the various modules. The numbers indicate the order of
assembly.
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching
any parts or touching glass surfaces.
①
Loosen the set screw and remove the trinocular viewing head from the body of the microscope.
②
Insert the Fluorescence attachment into the microscope and tighten the set screw until it is firmly in
place.
③
Insert the viewing head into the Fluorescence attachment as shown and tighten the set screw until it
is firmly in place.
ACCU-SCOPE
EXC-500 FLUORESCENCE MICROSCOPE SYSTEM
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 5