SMART Board 6000S Pro Series User Manual page 21

Chapter 2
Using basic features
The image and table below list the remote control's functions.
No. Name
1 Power
2 Home
3 Up and down
buttons
4 OK
5 Left and right
buttons
6 Back
7 Input
smarttech.com/kb/171415
Procedure
Press to enter or exit Standby mode (see Waking up the display and
l
putting it back to sleep on page 17).
Press and hold for four seconds to turn off the display.
l
Press and hold for 10 seconds to reset the display.
l
Open the Home screen or the Input screen (see Using the Home
button on page 18).
Select a menu option in the settings.
Select menu option in the settings.
Change the value of the selected setting.
Go one step back in the navigation history.
Switch input sources (see Viewing a connected computer's input on
page 35).
21