SMART Board 6000S Pro Series User Manual page 13

Chapter 1
Welcome
For more information, see Waking up the display and putting it back to sleep on page 17.
Ambient light sensor
The ambient light sensor is located in the top left corner of the display's frame.
The ambient light sensor detects the room's brightness and adjusts the brightness of the
screen accordingly.
You can enable, disable, and adjust this feature. Refer to the SMART Board 6000S and
6000S Pro series interactive displays installation and maintenance guide
(smarttech.com/kb/171414) for more information.
Remote control and IR sensor
You can use the remote control to turn the display on and off, adjust display settings,
and so on.
The display's IR sensor is located in the top-left corner of the display's frame.
For more information about the remote control, see Using the remote control on
page 20.
Temperature and humidity sensors
The display features integrated temperature and humidity sensors that enable real-time
measurement and recording of the environmental conditions surrounding the display.
This data is easily accessible using the temperature and humidity app in the display's
App library.
NOTE
Temperature and humidity sensors are available only when iQ is enabled.
For more information, see Using the SMART Sensors app on page 29.
Mounting hardware
The display comes with a WM-SBID-200 wall mount, which your organization can use to mount the display
smarttech.com/kb/171415 13