Chapter 2: Using Basic Features; Waking Up The Display And Putting It Back To Sleep - SMART Board 6000S Pro Series User Manual

Chapter 2
Using basic features
Waking up the display and putting it back to sleep
Using the Home button
Using the convenience panel
Using the remote control
Using touch
Using the pens and erasers
Writing and drawing in digital ink
Using the SMART Ink dynamic (floating) toolbar
Changing a pen's default color, thickness, and other properties
Erasing digital ink
Adjusting the volume
Freezing or hiding the screen
Freezing the screen
Showing and hiding the screen shade

Waking up the display and putting it back to sleep

The display's proximity sensor can detect people up to 16' (5 m) away when the display is in Standby mode
(a full sleep state). Depending on the display's configuration, it turns on or enters Ready mode (a partial
sleep state) when the sensor detects people.
If the display is in Ready mode, you can turn it on in a number of ways:
Press the Power button
l
Tap the Home button below the screen.
l
NOTE
The Home button is illuminated when the display is in Ready mode.
Press the Home button
l
Pick up a pen or the eraser.
l
smarttech.com/kb/171415
on the convenience panel.
on the remote control.
17
18
19
20
22
24
24
25
25
25
26
27
27
27
17