SMART Board 6000S Pro Series User Manual page 12

Chapter 1
Welcome
The display comes with SMART software that you can install on connected computers to take full
advantage of the display's features while using the connected computers.
For more information, see Connecting room computers and guest laptops on page 35.
Accessory slot
You can install an OPS-compatible device, such as a SMART OPS PC module, in the accessory slot. The
PCM8 series of SMART OPS PC modules provides a complete Windows 10 Pro installation.
For more information about the SMART PCM8 series OPS PC, see SMART OPS PC module on page 15.
NOTE
Unlike with previous SMART Board interactive displays, the SMART Board 6000S and 6000S Pro
interactive displays don't require an AM30, AM40, or AM50 appliance in the accessory slot. The iQ
experience is embedded on these interactive displays (see iQ experience on page 10). For this reason,
SMART doesn't recommend installing AM30, AM40, or AM50 appliances in these displays' accessory
slots.
Convenience panel
Proximity sensor
The proximity sensor is located in the top-left corner of the display's frame.
The proximity sensor can detect people up to 16' (5 m) away when the display is in
Standby mode.
When the proximity sensor detects people in the room, the display turns on or
enters ready mode, depending on how its configured.
If the room is empty for a specified period, the display returns to Standby mode.
smarttech.com/kb/171415
The convenience panel provides buttons for turning the display on and off,
controlling the volume, freezing and unfreezing the screen, and showing
and hiding a screen shade. It also includes connectors for
and a computer or other input source.
For more information about the convenience panel, see Using the
convenience panel on page 19.
USB peripherals
12