Configuration Commands/Queries Quick Reference; Redundancy Commands/Queries Quick Reference; Status Commands/Queries Quick Reference - Comtech EF Data UT-4500 Series Installation And Operation Manual

UT-4500 Series C- and Ku-Band Up Converters
Serial Interface Operation
8.7.1.2

Configuration Commands/Queries Quick Reference

Sect. Item Description
8.7.3.1 FRE Set Frequency
8.7.3.2 IFF Set IF Frequency
8.7.3.3 ATT Set Attenuation
8.7.3.4 CLD Select Cold Start Mode
8.7.3.5 MUT Mute/Unmute Converter
8.7.3.6 CMM Configure Mute Mode
8.7.3.7 CRM Set Redundant Mute Mode
8.7.3.8 AFR Set Fault Recovery Mode
8.7.3.9 PGM Set a Preset
8.7.3.10 DPS Get All Presets
8.7.3.11 CLR Clear a Preset
8.7.3.12 SEL Select a Preset
8.7.1.3

Redundancy Commands/Queries Quick Reference

Sect. Item Description
8.7.4.1 RED Set Redundancy Mode ON/OFF
8.7.4.2 ICT Configure Redundant Converter
8.7.4.3 SAM Select Auto/Manual Mode
8.7.4.4 FBU Forced Backup Mode
8.7.1.4

Status Commands/Queries Quick Reference

Sect. Item
8.7.5.1 RCS
8.7.5.2 RMS
8.7.5.3 RUS
8.7.5.4 RAS
8.7.5.5 SAS
8.7.5.6 TSC
8.7.5.7 PACRCS
8.7.5.8 PACRMS
8.7.5.9 PACRUS
8.7.5.10 PACRAS
Description
Return Configuration Status
Return Maintenance Status
Return Utility Status
Return Alarm Status
Summary Alarm Status
Terminal Status Change
Packed Configuration Status
Packed Maintenance Status
Packed Utility Status
Packed Alarm Status
8–10
MN/UT4500.IOM
Revision 3
Syntax
<DEV/FRE_xxxxx.xxx{cr}
<DEV/IFF_xxx{cr}
<DEV/ATT_xx.xx{cr}
<DEV/CLD_xxx{cr}
<DEV/MUT_xxx{cr}
<DEV/CMM_xxx{cr}
<DEV/CRM_xxx{cr}
<DEV/AFR_xxx{cr}
<DEV/PGM_nn_xxxxx.xxx_yy.yy{cr}
<DEV/DPS_{cr}
<DEV/CLR_nn{cr}
<DEV/SEL_nn{cr}
Syntax
<DEV/RED_xxx{cr}
<DEV/ICT_xx_yy{cr}
<DEV/SAM_xx_y{cr}
<DEV/FBU_xx_y{cr}
Syntax
<DEV/RCS_{cr}
<DEV/RMS_{cr}
<DEV/RUS_{cr}
<DEV/RAS_{cr}
<DEV/SAS_{cr}
<DEV/TSC_{cr}
<DEV/PACRCS_{cr}
<DEV/PACRMS_{cr}
<DEV/PACRUS_{cr}
<DEV/PACRAS_{cr}