Utility:) Time (Real-Time Clock) Submenu; Utility:) Disp (Vfd Display) Submenu; Utility:) Firmware Submenu - Comtech EF Data UT-4500 Series Installation And Operation Manual

UT-4500 Series C- and Ku-Band Up Converters
Front Panel Operation

6.2.7.1 (UTILITY:) TIME (Real-Time Clock) Submenu

This function follows Military time format (00 to 24 hours).
Edit the time and date settings of the real-time clock. Use the   keys to select
a digit to edit, and then use the  keys to change that digit. Press ENTER.

6.2.7.2 (UTILITY:) DISP (VFD Display) Submenu

Edit the display brightness. Use the  keys to select a brightness value of
25%, 50%, 75%, or 100%. Press ENTER when the brightness is suitable.

6.2.7.3 (UTILITY:) FIRMWARE Submenu

THESE MENUS ARE INTENDED FOR DIAGNOSTIC PURPOSES ONLY. DO
NOT CHANGE AN IMAGE UNLESS OTHERWISE INSTRUCTED BY
COMTECH EF DATA PRODUCT SUPPORT.
This series of submenus permits you to view information about the UT-4500
internal firmware. The converter can store two complete firmware images, and
you can select which image will be loaded the next time the unit reboots.
Use the   keys to select INFO or SELECT. Press ENTER.
Edit Real-Time Clock:
HH:MM:SS MM/DD/YY
VFD Display Brightness:
100%
Firmware Images:
INFO SELECT
6–23
MN/UT4500.IOM
Revision 3