Remote Operation - Commands/Queries; Command/Query Quick References; Utility Commands/Queries Quick Reference - Comtech EF Data UT-4500 Series Installation And Operation Manual

UT-4500 Series C- and Ku-Band Up Converters
Serial Interface Operation
8.7 Remote Operation – Commands/Queries
8.7.1

Command/Query Quick References

8.7.1.1

Utility Commands/Queries Quick Reference

Sect. Item Description
8.7.2.1 TIM Set Time
8.7.2.2 DAT Set Date
8.7.2.3 TPE Set Time Protocol
8.7.2.4 TPS Set Time Protocol IP Address
8.7.2.5 LRS Set Local / Remote Status
8.7.2.6 MAC Get MAC Address
8.7.2.7 IPA Get IP Address
8.7.2.8 IPG Get IP Gateway
8.7.2.9 SPA Set Physical Address
8.7.2.10 SBR Set Baud Rate
8.7.2.11 CON Set LCD Contrast
8.7.2.12 LCD Set LCD Brightness
8.7.2.13 SSM Set Screen Saver Mode
8.7.2.14 SST Set Screen Saver Timeout
8.7.2.15 VFD Set VFD Brightness
8.7.2.16 SRO Set Reference Oscillator
8.7.2.17 SSA Set Converter Slope Adjustment
8.7.2.18 RET Get Equipment Type
8.7.2.19 PNM Get Part Number
8.7.2.20 FRW Get Legacy Firmware Information
8.7.2.21 FRM Get Firmware Information
8.7.2.22 IMG Set Firmware Image
8.7.2.23 AID Set Application ID Message
8.7.2.24 FRB Set Force Reboot
Syntax
<DEV/TIM_hh:mm:ss{cr}
<DEV/DAT_mm/dd/yy{cr}
<DEV/TPE_x{cr}
<DEV/TPS_xxx.xxx.xxx.xxx{cr}
<DEV/LRS_x{cr}
<DEV/MAC_ {cr}
<DEV/IPA_{cr}
<DEV/IPG_{cr}
<DEV/SPA_xxx{cr}
<DEV/SBR_xxxx{cr}
<DEV/CON_xx{cr}
<DEV/LCD_xx{cr}
<DEV/SSM_x{cr}
<DEV/SST_xx{cr}
<DEV/VFD_xxx{cr}
<DEV/SRO_xxx{cr}
<DEV/SSA_xxx{cr}
<DEV/RET_{cr}
<DEV/PNM_{cr}
<DEV/FRW_{cr}
<DEV/FRM_{cr}
<DEV/IMG_x{cr}
<DEV/AID_xxxxx...xxxxx{cr}
<DEV/FRB_YES{cr}
8–9
MN/UT4500.IOM
Revision 3