Table of Contents
Advertisement
Available languages
Available languages
8.
Attach the microfiber mop (19) to the holder (18) and snap it into the center of the scrub head
(16).
9.
Plug the power cord (12) into an electrical outlet.
10. When cleaning the carpet, install the carpet glider (6) to make it easier to clean.
DESCRIPTION OF OPERATION
Switching the vacuum cleaner On/Off: press the „POWER" button. The appliance can be used together
with hot steam or separately only as a vacuum cleaner.
Make sure that the valve seal is always in place as shown in the
figure.
Advertisement
Table of Contents
