Raritan Paragon II P2‐UMT1664M Quick Setup Manual

Paragon® II

Quick Setup Guide

Thanks you for your purchase of the Paragon II. This Quick Setup Guide explains how to install and configure the Paragon
II. For additional information on any aspect of the Paragon II, see the accompanying Paragon II User Guide, which can be
downloaded from the Firmware and Documentation section
(http://www.raritan.com/support/firmware-and-documentation/) of Raritan's website.
Note: The Ethernet port on the Paragon switch is hard coded (not configurable) and supports only 10-BaseT/half duplex.
Paragon II covers 4 basic types of devices:
Main Switching Unit (Main Unit)
Models: P2‐UMT242, P2‐UMT442, P2‐UMT832M, P2‐UMT1664M
User Station
Models: P2‐UST, P2‐EUST, P2‐EUST/C

Package Contents

Paragon Main Unit (P2-UMT242, P2-UMT442, P2-UMT832M,
or P2-UMT1664M):
•
Main Unit x 1
•
20-ft. (6.1-m) Cat5 test cable x 2
•
6-ft. (1.8-m) AC power cord x 1
•
Rackmount kit x 1 (including brackets and associated
screws)
Paragon II QSG
QSG-P2-0K-v4.6-E 255-30-6010-00
Stacking Unit
Models: P2‐UMT832S, P2‐UMT1664S
Computer Interface Module (CIM)
Models: P2CIM‐APS2, P2CIM‐AUSB, P2CIM‐ASUN, and more
•
Cat5 admin cable x 1
•
Quick Setup Guide x 1
Paragon Stacking Unit:
•
Stacking Unit x 1
•
RUMT-1U-LM304 or RUMT-2U-LM304 rackmount kit x 1
1