Figure 8 The Paragon System Configuration Window Listing Managed Base Paragon Switches - Raritan Paragon II Deployment Manual

C 2: U E
HAPTER PGRADING AN XISTING
37. From P2SC Admin, click on the Setup menu, then Base UMT's to bring up the list of base
switches being managed. The Paragon System Configuration window appears.

Figure 8 The Paragon System Configuration Window Listing Managed Base Paragon switches

38. Select the base switches to be updated and click Delete to delete them from this list.
39. Follow steps 2-19 in the previous section above to update the Firmware Loader, and then the
firmware of your base-tier Paragon switches.
40. Follow steps 26-33 in the previous section above to perform a partial reset of the Paragon II
system.
41. Return to P2SC Admin. From the Setup menu in P2SC Admin, click Base UMT's to bring
up the list of managed Paragon switches.
42. Click New to add a new entry to the list, and then fill out the IP Address and Port for each
base-tier Paragon switch being brought back under PCCI management.
43. Return to CommandCenter Secure Gateway, right click on the associated P2SC and select
Resume Management.
P II C C
ARAGON OMMAND ENTER
I S
NTEGRATION ETUP
13