Novexx Solutions 64 Series Technical Manual page 14

08/10 Rev. 5.05-01 TECHNICAL MANUAL
LED LTSI
Y2 Motor direction:
On = Down movement
Y3 Error signal to the 15-pin output connector at the USI (ana-
logous to the USI description)
Y4 Start_Print signal to the USI:
On = Label printing is enabled
Y5 SPS ready signal to the USI:
On = SPS enabled without error and in RUN mode
Y6 Touchdown error signal to the USI:
On = No touchdown error occured
Y7 Homeposition error signal to the USI:
On = No homeposition error occured
Tab. 3: PLC output-LED assignment.
a. The program version can be read on a label on the PLC housing.
64-xx
LTP / LTPV
Vacuum valve:
On = Vacuum switched on
(from feed start until appli-
cation)
14
Mounting the PLC