03/02 Rev. 2.14-02
Internal
External
64-xx – CHESS x – DPM – ALX 92x – Novexx PA-1x6
Connecting the board
Connect the cable data line and voltage supply (the cable is fixed to the
board) to the CPU board, next to the display cable connector.
Voltage supply : Connect it to the powerpack (24 V galvanic separated from
the voltage supply by data line).
Internal USI inputs: Optional connection of an Avery PLC and "OD sensor
material".
Jumper row: Possibility of connecting an Avery PLC.
USI signals : The 7 outputs and 4 inputs of the USI.
Jumper settings
No. Pos.
Description
JP8
5 V external voltage supply
5 V internal voltage source active at pin 2 / DB-15 (Default)
Fig. 8: Settings of JP8.
The maximum current in all 5 V and 24 V supply lines may not exceed
700 mA!
Also refer to section "Universal Serial Interface" in topic section
"Interfaces".
SERVICE MANUAL
Service - Boards, Page 16