03/02 Rev. 2.14-02
64-xx – CHESS x – DPM – ALX 92x – Novexx PA-1x6
3. The numeric value shown on the right hand part of the display, alters, if the
light barrier is covered.
listed in the table with covered and uncovered light barrier.
Num. value
less than 10
(typical: 0)
more than 10
(typical: 255)
Tab. 4: Sensor setting values.
The rewinder output stage requires a different setting procedure and
different values!
Refer to manual "Rewinder 2000", topic section "Connection, Setup,
Service".
For details about the parameter "SERVICE FUNCTIONS / Sensor test"
refer to topic section "Info-printouts and parameters".".
SERVICE MANUAL
Tab. 4:
shows the setting rules. Check the values
Setting condition
Light barrier uncovered
Light barrier covered
Service - Boards, Page 11