Inside The Box; Materials; Required Tools - Wallbox Supernova Installation Manual

GETTING STARTED

Inside the Box

Materials

A.
B.
Charging Point
EU pallet
E. F.
2 lavel plates Foot coverback
+ 4 threared bars + front
Front
x2 x4
Back
I. J.
Screws M5 x10 Screws M12 x16
x7 x6
M.
Screws M5x16
x4
14
C.
D.
Installation manual
Antivandalic Key
Supernova
Installation
Guide
G. H.
Nuts M16 Washer M16
x16 x2
K. L.
Support Entry Plate Membrane Entry Plate
GETTING STARTED

Required Tools

The following tools required for the installation of Supernova are
recommended for the Supernovas installation (not provided):
• 2x Spanner (size 24 mm) for M16 nuts
• Safety Torx screwdriver (size T30) for M6 screws
• Socket wrench (size 19) for M12 hexagonal screw.
• Optionally: wrench or spanner (size 19).
• Allen key for DIN 912 M5 screws.
• Hexagon socket wrench for M8
• Bolts M16 50 cm.
x5
15