Table of Contents
Advertisement
E N
Product Information
1
2
3
Note: UID is abcdefg for engineering samples
Family
Model
DC
X1
Box Contents
Your Wallbox box should contain the following:
Components
• Wallbox DC Charger 1ph with charging cable
• Installation guide
• Mounting parts
• Plug holder
• Wallplate
Following tools will be required for mounting your Wallbox:
Tools required
• Flat Screwdrivers: 5mm and 7mm
• 10mm Wrench
• Drilling machine plus 6mm and 5mm drill bits
Installation Instructions
The installation of the Wallbox should be undertaken by a qualified electrician in accordance with the
applicable standards and regulations. Preferably the installation should be undertaken by a Wallbox trained
installer. Local regulations on electrical installations, fire prevention, and accidents as well as emergency exits
implemented from installation must be taken into account.
8
Cable
EVC
0: 5m
J: CHAdeMO
S: CCS
1
Part number
2
Serial number
3
EAN code
4
Manufacturing date / country
5
Electricity supply configuration
Power
Version
1: 4. 6 kW
-
2: 7.4kW
Mounting parts
• 4 x 6x30mm Screws
• 2 x 5x40mm Screws
• 4 x Ø6mm Wall anchors
• 4 x 5x10mm Screws
• 2 x Ø5mm Wall anchors
• Cutter or wall cable cutter
• Torx keys: T10 and T25
Custom
Revision
-
-
Advertisement
Table of Contents
