TOHATSU MFS 25D Owner's Manual page 74

74
INSPECTION AND MAINTENANCE
Description
Propeller
Shear pin/Split
pin
Gear oil
Lower Unit
Water strainer
Water pump
impeller
Water pump
housing
Throttle cable
Throttle link
Shift/
Throttle
Shift cable
Shift link
Power trim & tilt
Warning system
Stop switch
Meters
Bolt, nut
Sliding part/rotation part
Grease nipple
Outer equipment
Anode (engine)
Anode (except for engine)
Top cowl/Ratch
*" " This procedure can be performed by end user.
10
*" " This procedure shall be carried out by the dealer.
ENON00030-1
Note
It is highly recommended that your outboard motor to go through complete inspection at 300
hours of use.
Inspection intervals
First 20 Every 50 Every 100 Every 200
hours or 1 hours or 3 hours or 6 hours or 1
month months months year
Replace Replace
/
Replace
/ /
/
Every 400
Inspection procedure
hours or 2
year
Check/Replace if necessary.
Check/Replace if necessary.
Change and replace.
Check
Check/Replace if necessary.
Check/Replace if necessary.
Check/Replace if necessary.
Check and adjust.
Check/Replace if necessary.
Check and adjust.
Check and replenish.
Check
Check
Check
Retighten
Apply grease and Pump in
grease
Pump in grease
Check
Check/Replace if necessary.
Check/Replace if necessary.
Check and adjust.
/
Remarks
Approx. 460 mL
(15.6/16.2 US/
Imp. oz.)